NEC NLT-19HDDV3 - Setting up TV Stations; Auto Programme Tuning

Setting up TV stations
17
Press the MENU button and then use
DD
/
EE
button
to select the STATION menu.
Press the
GG button and then use
DD
/
EE
button to
select
Auto.
Press the
GG button to display the Auto menu.
Press the
DD
/
EE
button to select System.
Press the
FF
/
GG button to select ALL, DTV, TV.
ALL : Digital & Analogue search
DTV : Digital search only
TV : Analogue search only
Press the
DD
/
EE
button to select Storage from.
Select the beginning programme number with the
FF
/
GG button on the Storage from pull down
menu.
Press the
DD
/
EE
button to select Search.
Press the
GG button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the
DIGITAL LIST will appear on the screen. See the
‘Edit’ section to edit the stored programme.
Repeatedly press the MENU button to return to nor-
mal TV viewing.
Auto programme tuning
- Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the or
NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
- All stations that can be received are stored by this method. It is recom-
mended that you use auto programme during installation of this set.
E DD
F G OK MENU
STATION
System F ALL G
Storage from 3
Search
GGG
Auto
Manual
Edit
Auto
Manual
Edit
E DD
G OK MENU
STATION
E DD
F G 0-9 OK MENU
STATION
System F ALL G
Storage from 3
Search
GGG
Auto
Manual
Edit
STOP - MENU
STATION
System F ALL G
Storage from 3
Search
GGG
Auto
Manual
Edit
4
15%
C08