NEC NP-PH3501QL - Page 101

84
5. Using On-Screen Menu
[BLANKING]
Adjuststhedisplayrange(blanking)atthetop,bottom,leftandrightedgesoftheinputsignal.
SelectingOverscanPercentage[OVERSCAN]
Selectoverscanpercentage(Auto,0%,5%and10%)forsignal.
Projected image
Overscaned by 10%
NOTE:
• The[OVERSCAN]itemisnotavailable:
 -when[NATIVE]isselectedfor[ASPECTRATIO].