112
5. Using On-Screen Menu
[SOURCE OPTIONS(1)]
SelectingDefaultSource[DEFAULTINPUTSELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ...................... Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO
..................... Searches for an active source in order of HDMI1 → HDMI2 → DisplayPort1 → DisplayPort2 → HDBaseT
→ SDI1 → SDI2 → SDI3 → SDI4 → SLOT and displays the first found source.
HDMI1
................... Displays the digital source from the HDMI 1 IN connector every time the projector is turned on.
HDMI2
................... Displays the digital source from the HDMI 2 IN connector every time the projector is turned on.
DisplayPort1
.......... Displays the digital source from the DisplayPort1 IN connector every time the projector is turned on.
DisplayPort2
.......... Displays the digital source from the DisplayPort2 IN connector every time the projector is turned on.
HDBaseT
................ Project the HDBaseT signal.
SDI1
...................... Displays the digital source from the SDI1 IN terminal every time the projector is turned on.
SDI2
...................... Displays the digital source from the SDI2 IN terminal every time the projector is turned on.
SDI3
...................... Displays the digital source from the SDI3 IN terminal every time the projector is turned on.
SDI4
...................... Displays the digital source from the SDI4 IN terminal every time the projector is turned on.
SLOT
...................... Displays the picture via the optional board (sold separately) inserted into the SLOT.
[SEAMLESSSWITCHING]
Whentheinputconnectorisswitched,theimagedisplayedbeforeswitchingisheldtoswitchtothenewimagewithout
abreakduetoabsenceofasignal.
SelectingaColororLogoforBackground[BACKGROUND]
Usethisfeaturetodisplayablue/blackscreenorlogowhennosignalisavailable.Thedefaultbackgroundis[BLUE].
NOTE:
• Tochangetheimagedisplayedasthelogo,seepage146.