NEC NP110 - Connecting to a Network (NP216;NP215 Only)

16
2. Installation and Connections
Connecting to a Network (NP216/NP215 only)
TheprojectorcomesstandardwithaLANport(RJ-45)whichprovidesaLANconnectionusingaLANcable.
Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings for the projector over a LAN.
TouseaLANconnection,youarerequiredtoassignanIPaddresstotheprojectoronthe[PROJECTORNETWORK
SETTINGS]screenofthewebbrowseronyourcomputer.Forsetting,seepage37, 38, 39.
ExampleofLANconnection
Example of wired LAN connection
LAN
LAN
Server
Hub
LAN cable (not supplied)
NOTE: Usea Category 5
orhigherLANcable.
NP216