NEC NP110 - Page 66

57
5. Using On-Screen Menu
[MENU]
SelectingMenuColor[COLORSELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
TurningOn/OffSourceDisplay[SOURCEDISPLAY]
This option turns on or off input name display such as COMPUTER, VIDEO, S-VIDEO and No Input to be displayed
on the top right of the screen.
When[ON]isselected,thefollowingwillbedisplayed:
- Aninputnamedisplaysuchas[COMPUTER]willbeshownimmediatelyaftersourceselection.
- [NOINPUT]willbeshownwhenthereisnosignalpresent.
TurningON/OFFControlID[IDDISPLAY]
ID DISPLAY ........... This option turns on or off the ID number which is displayed when the ID SET button on the remote control
is pressed.
TurningOn/OffEcoMessage[ECOMESSAGE]
This option turns on or off the following messages when the projector is turned on.
TheEcoMessagepromptstheusertosaveenergy.When[OFF]isselectedfor[ECOMODE],youwillgetamessage
topromptyoutoselect[ON]for[ECOMODE].
When[ON]isselectedfor[ECOMODE]
To close the message, press the ENTER or the EXIT button. The message will disappear if no button operation is
done for 30 seconds.
When[OFF]isselectedfor[ECOMODE]
PressingtheENTERbuttonwilldisplaythe[ECOMODE]screen.(→ page 56)
To close the message, press the EXIT button.