NEC NP110 - Page 74

65
5. Using On-Screen Menu
[3D]
[NP215/NP210/NP115/NP110] [NP216]
Selectinginputconnectedtoasourceof3Dimages[COMPUTER/VIDEO/S-VIDEO]/[COMPUTER1/COM-
PUTER2/VIDEO/S-VIDEO](NP216only)
This function switches the 3D mode between ON and OFF for each input.
ON ......................... Turns on the 3D mode for the selected input.
NOTE:
Toconrmthatthesupported3Dsignalisaccepted,useeitherwayofthefollowing:
- Makesurethat[3D]isdisplayedinthetoprightofthescreenafterthesourceisselected.
- Display[INFO.]→[SOURCE]→[3DSIGNAL]andmakesurethat"SUPPORTED"isdisplayed.
OFF ........................ Turns off the 3D mode for the selected input.
EnablingDLP
®
Linktoview3Dimages[DLP®Link]
This function switches the DLP
®
Link system between ON and OFF.
ON ......................... Turns on the DLP
®
Link system.
OFF
........................ Turns off the DLP
®
Link system.
NOTE:
TouseDLP
®
LinkcompatibleLCDshuttereyeglasses,select[ON].
TouseotherLCDshuttereyeglassessuchasIRorwiredLCDshuttertypes,select[OFF].
IfyouuseLCDshuttereyeglassesthatarenotcompatiblewithDLP
®
Link,theLCDshuttereyeglassesmaynotsynchronizetothe
projector properly.
Invertingtheorderofdisplayingtheimagesforlefteyeandrighteye[L/RINVERT]
This function changes the order of displaying the images for left eye and right eye.
Change the setting if you have difficulty seeing 3D images.
Each time you press the PICTURE button on the remote control, the following menu items will change:
[L/RINVERT]→[CONTRAST]→[BRIGHTNESS]...