NEC NP41 - ➍ Adjusting Focus Manually


3. Projectng an Image (Basc Operaton)
SELECT
SOURCE
AUTO
ADJ.
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
SOURCE
AUTO
ADJ.
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
SELECT
➍
Adjusting Focus Manually
Adjust the focus manually in the following cases:
• When adjusting the focus out of the effective range of the auto
-
matic focus
• When nely adjusting the focus
• When the menu setting for [AUTO FOCUS] is turned off
Adjustng wth buttons on the cabnet or the remote control
 
The focus adjustment screen will be displayed.
The focus adjustment screen will be closed if no button operation is
made for 5 seconds.
TIP: If the projector is placed within the effective focus range, pressing and
holding the FOCUS for a minimum of 2 seconds starts the AUTO FOCUS func-
tion.

◀▶

The focus adjustment screen will be closed.
VOLUME ASPECT HELP
FOCUS L - MOUSE - R
FREEZE
PICTURE
LAMP MODE
VIDEO AUTO ADJ.COMPUTER
S-VIDEO VIEWER
ENTER
EXIT
MENU
UP
PAGE
OFF
POWER
ON
DOWN
MAGNIFY AV-MUTE