. Usng On-Screen Menu
Adjustng Horzontal/Vertcal Poston [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and vertical frequen-
cy, its adjustments will be called up and applied.
To delete adjustments stored in memory, from the menu, you select [RESET]
→ [CURRENT SIGNAL] or [ALL
DATA] and reset the adjustments.
To Next Page
Loading...
