NEC NP41 - Page 59

To Next Page

To Previous Page

0

. Usng On-Screen Menu

Selectng Menu Color [MENU COLOR SELECT]

You can choose between two options for menu color: COLOR and MONOCHROME.

Selectng Menu Dsplay Tme [MENU DISPLAY TIME]

This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.

The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is

the factory preset.

Selectng a Color or Logo for Background [BACKGROUND]

Use this feature to display a blue/black screen or logo when no signal is available. The default background is

[LOGO].

NOTE: Your setting will not be affected even when [RESET] is done from the menu.

Selectng Communcaton Speed [COMMUNICATION SPEED]

This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It supports data rates from 4800 to 38400

bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending

on the equipment, a lower baud rate may be recommended for long cable runs).

NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.

Other manuals for NEC NP41