NEC NP43 - Page 68

59
6. Using On-Screen Menu
[CONTRAST]
Adjuststheintensityoftheimageaccordingtotheincomingsignal.
[BRIGHTNESS]
Adjuststhebrightnesslevelorthebackrasterintensity.
[SHARPNESS]
ControlsthedetailoftheimageforVideo.
[COLOR]
Increasesordecreasesthecolorsaturationlevel.
[HUE]
Variesthecolorlevelfrom+/−greento+/−blue.Theredlevelisusedasreference.
Inputsignal CONTRAST BRIGHTNESS SHARPNESS COLOR HUE
Computer(RGB) Yes Yes No No No
Component Yes Yes Yes Yes Yes
Video,S-Video Yes Yes Yes Yes Yes
Viewer(NP64/
NP54)
Yes Yes No No No
Yes=Adjustable,No=Notadjustable
[VOLUME]
Adjuststhevolumeoftheprojectorspeaker.
NOTE:
• Thevolumelevelissetto“16”atthefactory.
• VolumecanbealsoadjustedbyusingtheVOLUME(+/−)buttonontheremotecontrol.
[RESET]
Theadjustmentsfor[CONTRAST],[BRIGHTNESS],[SHARPNESS],[COLOR],[HUE],and[VOLUME]willbere-
turnedtothefactorysettingvalues.