Pulse to Tone Conversion
130 ◆ Features DSX Feature Handbook
Pulse to Tone Conversion
Description
An extension can use Pulse to Tone Conversion while placing an outside call to change the dialing mode
from dial pulse to DTMF. For a system in a dial pulse area, this permits users to access DTMF services (such
as telephone banking) from their DP area. Pulse to tone conversion also helps dial pulse callers use another
company’s automated attendant dialing options. The user can, for example:
❥ Place a call to their bank over a DP line.
❥
After the banking service answers, wait 6 seconds. (The system automatically converts dialing to DTMF.)
❥ Dial additional banking options.
Operation
Use special services (such as telephone banking) over dial pulse lines.
Converting Dialing from DP to DTMF
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To convert your telephone’s dialing to DTMF after placing your call on a DP line:
1.
Dial the initial digits for the call.
2.
Wait six seconds.
3.
Dial additional digits.
• The additional digits dial out as DTMF.
To Next Page
Loading...
