Central Office Calls, Answering
32 ◆ Features DSX Feature Handbook
Central Office Calls, Answering
Description
The system provides flexible routing of incoming CO calls to meet the exact site requirements.
Answering Priority
When multiple calls ring an extension simultaneously, the system services the ringing calls in the follow-
ing order:
1. Ringing Intercom call
2. Line or loop key (from lowest to highest)
Operation
User Programmable Feature
The system allows outside calls to ring and be answered at any combination of system extensions.
Answering Outside Calls
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To answer an outside call:
• An incoming call on a line or loop key will flash red.
• An incoming call on your Direct Inward Line will flash green.
1.
Lift handset.
• If you have Ringing Line Preference, this will answer the incoming call.
• If you have Automatic Handsfree, you can press the line or loop key without first lifting the handset.
2.
Press flashing line or loop key.
• The key will be on (green) after you answer the call.
Setting Up Line Key Ringing
Feature Mnemonic Operation Access Level
Feature Keys
#RAL
(#725)
Outside Line Keys: #RAL + Line Key repeatedly to select
ringing mode + SPEAKER to exit.
• Line keys flash as follows:
- Lamp only = On red
- Immediate ring = On green
- Delay ring = Fast flash green
- Night ring = Slow flash green
2-5
To Next Page
Loading...
Need help?
General