Callback
DSX Feature Handbook Features ◆ 29
Features
Callback
Description
When an extension user calls a busy co-worker, they can leave a Callback request for a return call. The sys-
tem services Callback requests as follows:
❥ Caller at extension A leaves a Callback at extension B.
- Caller can place or answer additional calls in the mean time.
❥ When extension B becomes idle, the system rings extension A. This is the Callback ring.
❥ Once caller A answers the Callback ring, the system rings (formerly busy) extension B.
- If caller A doesn’t answer the Callback ring, the system cancels the Callback.
❥ As soon as caller B answers, the system sets up an Intercom call between A and B.
An extension user can leave a Callback at many extensions simultaneously. The system processes the Call-
backs as the extensions become free. In addition, many extensions can leave a Callback at the same exten-
sion. The system processes these Callbacks on a first-in/first-out (FIFO) basis.
If an extension user leaves a Callback request and then fails to answer within four rings, the system cancels
the Callback.
Operation
With Callback, a user does not have to repeatedly call a busy extension back, hoping to find it idle.
Leaving a Callback
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To leave a Callback at a busy extension:
1.
Call the busy extension.
• Listen for busy or busy/ring tone.
2.
Dial 2 and hang up.
• Stay on the line without hanging up if you want to Camp-On instead.
3.
When the busy co-worker becomes free:
• You hear Intercom ring.
4.
Answer the Intercom ring.
• The system automatically places a call to your co-worker.
• Speak to your co-worker when the call goes through.
Cancelling a Callback
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To cancel a Callback:
1.
Do not lift the handset, do not press INTERCOM, and do not press SPEAKER.
2.
Dial # + DC (32).
• This cancels the Callback you have left. If you have left callbacks for several extensions, this simultaneously
cancels all your Callbacks.
To Next Page
Loading...
