Single Line Telephones
DSX Feature Handbook Features ◆ 143
Features
Call Waiting / Camp-On
1.
Call busy extension.
2.
Dial 2 but do not hang up.
• If you hang up, the system converts your Camp-On to a Callback.
3.
Speak to your co-worker when they answer their Camp-On ring.
Callback
1.
Call busy extension.
2.
Dial 2 and hang up.
• Stay on the line without hanging up if you want to Camp-On instead.
3.
When Callback rings your phone, lift handset to answer.
4.
Speak to your co-worker when call goes through.
Central Office Calls, Answering
1.
When your telephone rings, lift the handset.
Central Office Calls, Placing
1.
Lift the handset.
2.
Do one of the following.
a.
For Line Dial-Up:
i.
Dial #9 followed by the line number (e.g., #901 for line 1).
b.
For Direct Line Access:
i.
Dial 1 followed by the line number (e.g., 101 for line 1).
c.
For Line Group Access:
i.
Dial the Line Group code (9 or 90-98).
3.
Dial the outside number.
Conference
1.
Establish Intercom or outside call.
2.
Hookflash and dial the extension or line you want to add/
3.
Hookflash and dial #10 to set up the Conference.
• If you cannot add additional parties to your Conference, you have exceeded the system’s Conference limit.
4.
Repeat steps 2 and 3 to add additional parties to your Conference.
To Next Page
Loading...
Need help?
General