NEC P/N 1093099 - Page 167

Tandem Calls / Unsupervised Conference
DSX Feature Handbook Features ◆ 159
Features
Using Line-to-Line Transfer to set up a Tandem Call
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To set up a Tandem Call via line-to-line Transfer:
1.
Place or answer an outside call.
2.
Press TRANSFER.
3.
Place or answer another outside call.
4.
Hang up to set up a Tandem Call between your initial call and new call.