NEC P/N 1093099 - Page 187

Walking Class of Service
DSX Feature Handbook Features ◆ 179
Features
Entering or Changing Your PIN Number
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To enter your PIN number (if you don’t have one assigned):
1.
Press INTERCOM and dial ##6.
2.
When you see ENTER NEW PIN:
• Enter your new PIN number + HOLD.
• When entering your PIN number:
- CLEAR erases your entire entry.
-
REDIAL backspaces over (erases) the last digit entered.
3.
When you see REENTER NEW PIN:
• Confirm your entry by reentering your new PIN number.
4.
When you see NEW PIN ACCEPTED:
[Exit]
[Exit]
To change your PIN number (if you already have one assigned):
1.
Press INTERCOM and dial ##6.
2.
When you see ENTER PIN CODE:
• Enter your current PIN number + HOLD.
3.
When you see ENTER NEW PIN:
• Enter your new PIN number + HOLD.
• When entering your PIN number:
- CLEAR erases your entire entry.
- REDIAL backspaces over (erases) the last digit entered.
4.
When you see REENTER NEW PIN:
• Confirm your entry by reentering your new PIN number.
5.
When you see NEW PIN ACCEPTED:
[Exit]
[Exit]
Select to exit PIN number programming.