Call Forwarding Off Premises
DSX Feature Handbook Features ◆ 25
Features
[SPEED DIAL BIN]
[Bin]
Select the bin option.
When you see BIN#:
• Enter the Personal Speed Dial bin you want to use (701-720) + HOLD.
b.
To store a new Off Premises Call Forwarding number:
• The system automatically stores this number in bin 720.
[NUMBER]
[Num]
Select the number option.
When you see
LINE/GRP/ICM:
• Enter the line number (e.g., 1 for line 1) or Line Group number (e.g.,
90 for group 0) + HOLD.
• Following Speed Dial programming methods, enter the number you
want to store (up to 16 digits long) + HOLD.
- Press MUTE to store a Pause.
- Press FLASH to store a Flash.
- You cannot enter a name using this option.
If you see 720: IN USE OVERRIDE?
[YES]
[YES]
Select to override the existing entry and enter a
new number.
[NO]
[NO]
Select to cancel and back up to step 3.
c.
To view the currently enabled Off Premises Call Forwarding number (if any):
[VIEW]
[View]
Select to view the currently stored number.
• Press SPEAKER to exit the view mode.
4.
Select the Call Forwarding mode.
[All]
[All]
Select forwarding all calls.
• Alternately dial 2.
[Line Only]
[Line]
Select forwarding outside calls only.
• Alternately dial 8.
Activating or Canceling Call Forwarding Off Premises
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To Next Page
Loading...
