NEC P/N 1093099 - Page 75

Extension Hunting
DSX Feature Handbook Features ◆ 67
Features
Operation
Sending a Call to a Terminal or Circular Hunting Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To send a call to a Terminal or Circular Hunting Group:
1.
Do one of the following.
a.
Transfer an outside call to a hunt group member.
b.
Set up a DIL to a hunt group member.
c.
Place a ringing Intercom call to a hunt group member.
d.
Set up a hunt group member as a line’s overflow destination.
Sending a Call to a UCD Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To send a call to a UCD Group:
1.
Do one of the following.
a.
Transfer a call to the UCD Group master number.
b.
Set up a DIL to the UCD Group master number.
c.
Place an Intercom call to the UCD Group master number.
d.
Set up the UCD Group master number as a line’s overflow destination.
Removing/Reinstalling your Extension from your UCD Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To temporarily remove/reinstall your extension from your UCD Group:
1.
Press INTERCOM and dial *5.
2.
Do one of the following:
a.
Dial 4 to return your extension to your UCD Group.
b.
Dial 6 to remove your extension from your UCD Group.
3.
Press SPEAKER to hang up.