NEC P/N 1093099 - Page 97

Hold
DSX Feature Handbook Features ◆ 89
Features
b.
If the extension that placed the call on Hold has a programmed name:
Hold Recall
300: Attendant
To pick up an outside call on Exclusive Hold:
1.
Press the flashing line key.
• The line key lights solid (green).
Using Intercom Hold
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place an Intercom call on Hold:
1.
Press HOLD.
• INTERCOM flashes with a double-wink (on green) while on Hold - slow flash (green) while recalling.
To pick up an Intercom call from Hold:
1.
Lift the handset
2.
If you are not connected to the Intercom call, press INTERCOM.
Using Hold at a Single Line Telephone
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place an outside or Intercom call on Exclusive Hold:
• Single line telephones cannot place calls on System Hold.
1.
Hookflash.
2.
Dial *7 and hang up.
• If you leave the call on Hold too long, it will recall to you.
• If you hookflash and hang up without dialing *7, the call will recall immediately.
• If you have a call on Exclusive Hold and have a Camped-On call waiting, dialing *7 will answer the waiting
call. See Split (Alternate) (page 154) for more.
To retrieve your call from Exclusive Hold:
1.
Lift the handset and dial *7.
To pick up an outside call on system Hold at a co-worker’s extension:
• You must know the number of the line that is on Hold.
1.
Lift the handset and dial *4.
2.
Dial *4.
3.
Dial the number of the line that is on Hold.
• For example, dial 01 for line 1.
Using Exclusive Hold
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]