NEC P502WL - Page 72

59
4. Using On-Screen Menu
SettingHDMI1,HDMI2,orHDBaseT[HDMISETTINGS]
MakethesettingsforeachvideolevelwhenconnectingHDMIequipmentandEthernet/HDBaseTterminal.
VIDEO LEVEL ��������� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-
MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image
contrast and increase detail in the dark areas�
SettingAudio[AUDIOSELECT]
MakethesettingsforeachaudiolevelwhenconnectingHDMIequipmentandEthernet/HDBaseTterminal.Select
betweeneachequipmentandcomputer.
HDMI1, HDMI2 ����������� Select [HDMI1] or [HDMI2] to switch the HDMI 1 IN or HDMI 2 IN digital audio signal or select [COMPUTER]
to switch the COMPUTER input audio signal�
HDBaseT ���������������� Select [HDBaseT] or [COMPUTER] to switch the source connected to the network�
EnablingKeySoundandErrorSound[BEEP]
Thisfeatureturnsonoroffthebuttonsoundoralarmwhenanerroroccursorthefollowingoperationsareperformed.
-Displayingthemainmenu
-Switchingsources
-Resettingdatabyusing[RESET]
-PressingPOWERONorSTANDBYbutton