7. Connecting to a Network
117
PICTURE Controls the video adjustment of the projector.
CONTRAST ▲ Increases the contrast adjustment value.
CONTRAST ▼ Decreases the contrast adjustment value.
BRIGHTNESS ▲ Increases the brightness adjustment value.
BRIGHTNESS ▼ Decreases the brightness adjustment value.
SHARPNESS ▲ Increases the sharpness adjustment value.
SHARPNESS ▼ Decreases the sharpness adjustment value.
COLOR ▲ Increases the color adjustment value.
COLOR ▼ Decreases the color adjustment value.
HUE ▲ Increases the hue adjustment value.
HUE ▼ Decreases the hue adjustment value.
• The functions that can be controlled will vary depending on the signal being input to the projec-
tor. (→ page 57)
SOURCE SELECT This switches the input terminal of the projector.
HDMI1 Switches to the HDMI 1 IN terminal
HDMI2 Switches to the HDMI 2 IN terminal.
COMPUTER Switches to the COMPUTER IN terminal.
HDBaseT Switch to image input sent from a transmission device that supports
HDBaseT.
USB-A Switches to the data on the USB memory device.
LAN Switches to a LAN signal.
PROJECTOR STATUS This displays the condition of the projector.
LIGHT HOURS USED Displays how many hours the light module has been used.
ERROR STATUS Displays the status of errors occurring within the projector.
LOG OFF Logging off your projector and returning to the authentication screen (LOGON screen).
To Next Page
Loading...
