NEC P525UL - Selecting a Source

2. Projecting an Image (Basic Operation)
20
2-4. Selecting a Source
Selecting the computer or video source
NOTE:
• Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the INPUT button once. The projector will
search for the available input source and display it.
The input source will change as follows:
[HDMI1] → [HDMI2] → [COMPUTER] → [HDBaseT]
→ [USB-A] → [LAN]
• With the [INPUT] screen displayed, you can press
the INPUT button a few times to select the input
source.
• Press the SOURCE button when using the re-
mote control.
TIP:
• If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the HDMI1, HDMI2, HDBaseT,
COMPUTER, USB-A, or APPS buttons.