2. Projecting an Image (Basic Operation)
29
4. Press the ▲ button to select [KEYSTONE
HORIZONTAL] and then use the ◀ or ▶ so
that the top and bottom sides of the pro-
jected image are parallel.
• Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone
distortion.
6. After completing Keystone correction,
press the EXIT button.
The Keystone screen will disappear.
• To perform Keystone correction again,
press the ▼ button to display the Keystone
screen and repeat above steps 1 to 6.
To return the keystone adjustments to default:
1. Press the ▼ button to select [RESET] and press the ENTER button.
2. Press the ◀ or ▶ button to select [YES] and press the ENTER button.
The adjustments will be reset.
All the adjustments for all the five items will be reset at the same time.
• The KEYSTONE feature can cause an image to be slightly blurred because the correction is
made electronically.
To Next Page
Loading...
