4. Using On-Screen Menu
73
Enabling the deinterlace [DEINTERLACE]
Turns on or off the deinterlace function for a telecine signal.
OFF Select this option if there is any jitter or artifacts in video.
ON Default standard setting.
NOTE:
• This function is not available for HDTV (progressive) and computer signals.
Setting HDMI1, HDMI2, or HDBaseT [VIDEO LEVEL]
Make the settings for each video level when connecting HDMI equipment and Ethernet/HDBaseT
terminal.
Select [AUTO] to automatically detect video level. If automatic detection may not work well, select
[NORMAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to
improve image contrast and increase detail in the dark areas.
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following opera-
tions are performed.
TIP:
• Volume control for [BEEP] is disabled. AV-MUTE button is not effective to stop beeping sound. If you want to activate BEEP function, set [BEEP] to
[OFF].
To Next Page
Loading...
