To Next Page

To Previous Page

127

5. Using On-Screen Menu

[SOURCE OPTIONS]

Setting Auto Adjust [AUTO ADJUST]

ThisfeaturesetstheAutoAdjustmodesothatthecomputersignalcanbeautomaticallyormanuallyadjustedfor

noiseandstability.Youcanautomaticallymakeadjustmentintwoways:[NORMAL]and[FINE].

OFF �� The computer signal will not be automatically adjusted� You can manually optimize the computer signal�

NORMAL �� Default setting� The computer signal will be automatically adjusted� Normally select this option�

FINE �� Select this option if ﬁne adjustment is needed� It takes more time to switch to the source than when [NOR-

MAL]is selected�

TIP:

• Thedefaultsettingwhenshippedfromthefactoryis[NORMAL].

• WhentheAUTOADJ.buttonispressed,thesame[FINE]adjustmentiscarriedout.

[COLOR SYSTEM]

ThisfeatureallowsyoutoselecttheTVvideosignal,whichdiffersfromcountrytocountry(NTSC,PAL,etc.).

Thisissetto[AUTO]byfactorydefault.Setthisiftheprojectorcannotidentifythesignalautomatically.

[AUDIO SELECT]

ThisselectstheaudioinputoftheHDMI1INterminal,HDMI2INterminal,DisplayPortinputterminalandEthernet/

HDBaseTport*.

Wheninputtinganalogaudio,connecttheaudiooutputterminaloftheconnectingdevicewiththeBNCaudioinput

terminalandsettheAudioSelectto“BNC”.

* ForMMmodels,usetheHDMI1inputterminal,HDMI2inputterminal,DisplayPortinputterminal,Ethernetport,USB-Aport.

NEC PA621X User Manual

Other manuals for NEC PA621X