To Next Page

To Previous Page

2. Projecting an Image (Basic Operation)

❹ Selecting a Source

Selecting the computer or video source

NOTE:Turnonthecomputerorvideosourceequipmentconnectedtotheprojector.

DetectingtheSignalAutomatically

PresstheINPUTbuttonfor1secondorlonger.Theprojectorwillsearch

fortheavailableinputsourceanddisplayit.Theinputsourcewillchange

asfollows:

[HDBaseTModels]

HDMI1→HDMI2→DisplayPort→BNC→BNC(CV)→BNC(Y/C)→

COMUPTER→HDBaseT→HDMI1→…

[MMModels]

AutomaticallychecksforanyinputsignalintheorderHDMI1→HDMI

2→DisplayPort→BNC→BNC(CV)→BNC(Y/C)→COMPUTER→

USB-A.Theinputsignalwillbeprojectedwhenitisdetected.

• Pressitbrieytodisplaythe[INPUT]screen.

* ThisscreenbelongstoaHDBaseTmodel.

 Pressthe▼/▲buttonstomatchthetargetinputterminalandthen

presstheENTERbuttontoswitchtheinput.Todeletethemenudisplay

inthe[INPUT]screen,presstheMENUorEXITbutton.

TIP:Ifnoinputsignalispresent,theinputwillbeskipped.

Using the Remote Control

Press any one of the 1/HDMI 1, 2/HDMI 2, 3/DisplayPort, 4/BNC, 5/

BNC(CV), 6/BNC(Y/C), 7/Computer, 8/HDBaseT*

, or 9/USB-A*

 but-

tons.

*1 ForMMmodels,“8/Ethernet”willbeselectedandtheprojectorwillswitchto

theEthernet.

*2 HDBaseTmodelcannotbeused.

NEC PA621X User Manual

Other manuals for NEC PA621X