112

5. Using On-Screen Menu

[SOURCE OPTIONS]

SettingAutoAdjust[AUTOADJUST]

ThisfeaturesetstheAutoAdjustmodesothatthecomputersignalcanbeautomaticallyormanuallyadjustedfor

noiseandstability.Youcanautomaticallymakeadjustmentintwoways:[NORMAL]and[FINE].

OFF �� The computer signal will not be automatically adjusted� You can manually optimize the computer signal�

NORMAL �� Default setting� The computer signal will be automatically adjusted� Normally select this option�

FINE �� Select this option if ﬁne adjustment is needed� It takes more time to switch to the source than when [NOR-

MAL]is selected�

TIP:

• Thedefaultsettingwhenshippedfromthefactoryis[NORMAL].

• WhentheAUTOADJ.buttonispressed,thesame[FINE]adjustmentiscarriedout.

[COLORSYSTEM]

ThisfeatureallowsyoutoselecttheTVvideosignal,whichdiffersfromcountrytocountry(NTSC,PAL,etc.).

Thisissetto[AUTO]byfactorydefault.Setthisiftheprojectorcannotidentifythesignalautomatically.

SelectingDefaultSource[DEFAULTINPUTSELECT]

Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.

LAST �� Set the projector to default to the previous or last active input each time the projector is turned on�

AUTO �� Search for an active source in order of HDMI → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMPUTER

→ HDBaseT → SLOT and displays the ﬁrst found source�

HDMI �� Display the digital source from the HDMI IN terminal every time the projector is turned on�

DisplayPort �� Display the digital source from the DisplayPort IN terminal every time the projector is turned on�

BNC �� Project the input signal from the BNC input terminal

BNC(CV)

�� Project the input signal from the BNC(CV) input terminal�

BNC(Y/C) �� Project the input signal from the BNC(Y/C) input terminal�

COMPUTER �� Display the computer signal from the COMPUTER 1 IN terminal every time the projector is turned on�

HDBaseT �� Project the HDBaseT or WIRED LAN signal�

SLOT �� Project the picture via the optional board (sold separately) inserted into the SLOT�

NEC PX602UL User Manual

Other manuals for NEC PX602UL