NEC PX602WL - Connecting Component Input

131
6. Installation and Connections
Connecting Component Input
• Selectthesourcenameforitsappropriateinputterminalafterturningontheprojector.
Inputterminal
SOURCEbuttonontheprojector
cabinet
Buttonontheremotecontrol
COMPUTER1IN COMPUTER COMPUTER1
BNC BNC COMPUTER2
NOTE:
• Whenthesignalformatissetto[AUTO](defaultfactorysettingwhenshipped),thecomputersignalandcomponentsignalare
automaticallydistinguished and switched. If the signals cannot be distinguished, select [COMPONENT] under [ADJUST] →
[VIDEO]→[SIGNALTYPE]intheon-screenmenuoftheprojector.
• ToconnecttoavideodevicewithaDterminal,usethesoldseparatelyDterminalconverteradapter(modelADP-DT1E).
COMPUTER 1 IN
15-pin-to-RCA(female)×3cableadapter
(ADP-CV1E)
BNC(male)-to-RCA(male)conversion
cable×3(soldcommercially)
ComponentvideoRCA×3cable(notsup-
plied)
Blu-rayplayer
AudioEquipment