CHAPTER 5 FEATURE DESCRIPTION
UNIVERGE NEAX 2000 IPS General Description Page 138
Issue 5
Direct-In Termination - CCIS
This feature automatically routes incoming exchange calls through CCIS to a pre-assigned
station in the network, without Attendant assistance.
Distinctive Ringing – CCIS
This feature provides distinctive station ringing patterns for terminated calls, through the CCIS
network, so that a station user can distinguish between incoming internal and external calls.
Do Not Disturb - CCIS
This feature allows a station user to establish Do Not Disturb (DND) status on a temporary basis,
during which time access to the station from CCIS calls will be denied.
Dual Hold – CCIS
This feature allows two connected Multiline Terminals to be placed on hold simultaneously over
the CCIS link. This enables the held parties to answer or originate a call from a secondary
extension or the idle primary extension.
Elapsed Time Display – CCIS
This feature provides an LCD which shows the duration of time that a Multiline Terminal is
connected to any trunk through the CCIS network.
Flexible Numbering of Stations – CCIS
This feature allows voice and data station numbers to be assigned to any instrument in the CCIS
network, based solely upon numbering plan limitations.
Hands-Free Answerback - CCIS
This feature allows a Multiline Terminal station user to respond to a voice call, through the CCIS
network, without lifting the handset.
Hot Line – CCIS
This feature allows two stations, at different nodes in the CCIS network, to be mutually
associated on an automatic ringdown basis through the CCIS network.
House Phone – CCIS
This feature allows selected stations to call an Attendant Console, through the CCIS network,
simply by going off hook.
Incoming Call Identification - CCIS
This feature allows an Attendant to visually identify the type of service and/or trunk group which
is arriving or waiting to be answered at the Attendant Console through the CCIS network.
Individual Attendant Access – CCIS
This feature permits a station user to call a specific Attendant Console, in the CCIS network,
using an individual Attendant Identification Number.
LDN Night Connection – CCIS
This feature routes Listed Directory Number (LDN) calls to a pre-selected station, in the CCIS
network, when the Night mode has been entered.
Link Alarm Display - CCIS
This feature provides an indication on external equipment when the CCIS link is
connected/disconnected, when the system is initialized, or when the CCH is in make-busy.
To Next Page
Loading...
