CHAPTER 4 EQUIPMENT DESCRIPTION
UNIVERGE NEAX 2000 IPS General Description Page 91
Issue 5
Installation Hardware
Equipment Name Function
HANGER ASSEM (UL)
Wall Hanger Assembly
One HANGER ASSEM is required per PIM for Wall Mounting
installation.
19 INCH RACK
BRACKET (A)
19-inch Rack Mounting Bracket Type A
One bracket is required for one PIM configuration.
One bracket is required for the top PIM of multiple module
configuration.
19 INCH RACK
BRACKET (B)
19-inch Rack Mounting Bracket Type B
One bracket is required for the bottom module of multiple
module configuration.
MOUNTING BRACKET
Safety Mounting Bracket
Used as an overhead hanger for Floor Standing Installation.
Wire, chain or eyebolts are to be locally provided, to secure
the bracket. To be installed on the top PIM in four or more
modules of stack. It provides 1.1G shockproof construction.
I/F BRACKET ASSEM
Inter Frame Bracket Assembly
Used to joint the frames in two-frame configuration, for Floor
Standing Installation.
BASE TRAY ASSEM
Base Tray Assembly
One BASE TRAY is required per one frame for Floor Standing
Installation of Stationary Equipment.
RACK MOUNT KIT (U)
For DM (E) Modular Chassis - Two 19” rack-mounting ears,
quantity two 1” ears. One set is included with System
Package and each Expansion Module.
To Next Page
Loading...
