CHAPTER 2 SYSTEM CONFIGURATION
UNIVERGE NEAX 2000 IPS General Description Page 33
Issue 5
Circuit Cards
The circuit cards used for UNIVERGE NEAX 2000 IPS is divided into the following three types.
According to these card types, the mounting locations of card and port allocation of the Time
Division Switch are varied.
• Common Control Cards
- Main Processor (MP)
- Firmware Processor (FP)
- Ethernet
- Power
• Line/Trunk (LT) Cards
- IP PAD, Line Circuit (LC), Central Office Trunk (COT), Tie Line Trunk (LDT/ODT),
etc.
• Application Processor (AP) Cards
- SMDR/PMS/CIS/Hotel Printer Interface (AP00)
- T1/E1 Digital Trunk Interface (DTI)
To Next Page
Loading...
