CHAPTER 6 INSTALLATION, PROGRAMMING, AND MAINTENANCE
UNIVERGE NEAX 2000 IPS General Description Page 156
Issue 5
Program Changeover Service Conditions
The system is initialized automatically after executing the program changeover any data
that is not backed up will lost. Be sure to execute the office data backup before executing
the program changeover.
If an error is detected during system initialization after executing the program
changeover, the PBX starts automatically with the previous program.
If the program download is executed while the program version matching is being
executed, the program version matching is interrupted, and program download is
executed.
If the program changeover (immediate) is executed while the program version matching
is being executed, the program is changed after the program version matching is
completed.
The program changeover cannot be executed if the program downloading or program
version matching is interrupted or fails. If the program changeover (immediate) is set, the
setting is invalid.
The program changeover for which the schedule (date/time) has been set is executed
only when the PBX is on-line.
When immediate program changeover is executed after a schedule (date/time) for
program changeover execution is set, the schedule is invalid.
Required Hardware
Equipment Comments
CP24D (IPS/IPS Remote PIM)
CP31E (IPS
DML
)
CP31D (IPS
DMR
)
Main and Remote sites
Upgrade Program
MATWorX IPS Version 13.0.0
PC/Work station for FTP
Note
Windows 2000 Server/Windows 2000
Professional Windows XP Professional
(Internet Information Server (IIS) supplied with
Windows 2000/XPProfessional can be used)
Note:
MATWorX and FTP server program can be used on the same PC.
To Next Page
Loading...
