NEC UNIVERGE NEAX 2000 IPS - Page 60

CHAPTER 3 TERMINALS
UNIVERGE NEAX 2000 IPS General Description Page 56
Issue 5
Line Conditions of the Analog Terminals
Terminal
Type
Card Type
Cable Length*
(Cable 0.5/24 AWG)
PN-8LCAK
(max. 600 ohms loop resistance)
Approximately:
1.43km (.88 miles)
PN-AUCA
(max. 2500 ohms loop resistance)
Approximately
12.29km (7.63 miles)
PN-4LLCB
(max. 2500 ohms loop resistance)
Approximately
12.29km (7.63 miles)
DTR-1
DTR-1HM
DTH-1-1
PN-8LCAD
(max. 600 ohms loop resistance)
Approximately:
1.43km (.88 miles)
*Cable length is based on the diameter of the cable and the terminal impedance.
Specification for Analog Terminals
Item Description
Size 224mm x 165mm +/5mm (Length x Width)
Color Black or White
Dial Pad
12-Key Dial Pad: 4 Rows and 3 Columns;
Metropolitan Dial Pad with Alphabet, * and # buttons;
Button 5 has a Raised Dot
Type of Dial DTMF and Dial Pulse
Function Buttons
Hook flash, Redial Key on DTR-1-1; Hookflash,
Program, Redial, Monitor, and Hold Keys on DTR-
1HM-1
Message Waiting Lamp
Neon Lamp with Window Design -Glow Through Filter
Raised from Surface with MW and Incoming Ring
Indication
Operating Voltage
Activation Voltage 88V to 108V, Deactivation
Voltage 53V or Less
Speed Dials (DTR-1HM Only) 8 Buttons, Maximum 21 Digits
Hookflash Timer 630+/10ms (Fixed)
Redial Key Maximum of 31 digits
Ring Vol. Control 3 Levels (Soft, Medium, Loud) Programmable
Ring Tone Pitch Control 3 Levels (Slow, Medium, Fast, Off) Programmable
Handset Receiver &
Speaker Volume
6 Levels (Volume Key)
Handset Hearing Aid Compatible, Dynamic Type Element
Handset Cord 12 feet
Directory Card Large Convenient Directory Card
Data Jack
Dedicated Jack; Used for Connection to Modem,
Speakerphone, etc., located on back of telephone
Wall-Mount Unit Built-in
Electrostatic Discharge Can Withstand +/- 20kv Discharge
Approvals
c-UL (Ul 60950 3rd Edition) FCC part 15, 68,
IC (Industry Canada)