CHAPTER 3 TERMINALS
UNIVERGE NEAX 2000 IPS General Description Page 85
Issue 5
Automatic Idle Return:
This function allows for automatic disconnection during ROT or
BT tone being heard due to disconnecting by remote party. Administrator/user can choose to
disable or enable this function within the user configuration. The default for this
configuration is disabled.
PB tone sending:
During a call, a PB tone of the dial number which is set on the member
button can be sent by selecting the [send PB tone] with a right-mouse click of speed dial
number.
Pause into Dialing string: This feature allows the user to insert a pause into the dialed
number during the following conditions:
Drag/drop into the LCD or telephone ICON.
Copy/Paste
Placing/transferring a call with “Call to:” tag
Placing/transferring a call and sending the PB tone with using the member button.
Last Number Redial: A Dterm SP30 user can do a quick access and call to the most
recent call placed by the SP30. During the idle stage a user can redial the telephone
numbers previously dialed by selecting the [Redial] in pop up menu which appears by
right-clicking on a “Call” button.
Redial via Call Log:
The Dterm SP30 is capable of displaying the last 32 calling/called
telephone numbers. This is done by depressing the Up/Down arrow key (Keyboard)
when the LCD field is highlighted.
First number displayed on LCD screen will be the most recent called/received
telephone number.
Pressing the arrow up will cycle from the most recent to the latest calls/received
telephone number.
Pressing the arrow down button will cycle from the last to most recent calls
received/placed by the user.
One Touch Button in Compact Mode:
A button called the “One Touch” button has
been added to the compact panel. The “One Touch” button allows access quick access to
your speed dial list (Buddy List) that is conditioned on the main GUI under the Member
buttons. By clicking the “One Touch” button, you can place a call or transfer a call to any of
the member’s numbers that has pre-registered on the main GUI.
Notification of Call Received with No Answer: The Dterm SP30 Call Log button
which is located on the main and compact panel will flash in blue when a call was receive by
the Dterm SP30 but not answered. Before the integration of the blinking call Log button the
only way a user was noted that a call was received was if the remote party left a voice mail.
In those case where there was no voicemail message was left, the user had no way of
identifying whether calls were received or not. Users can confirm visual that a call was
received and immediately reply to the caller when they become available.
To Next Page
Loading...
