NEC Univerge SV8100 - Page 140

Issue 4.0 UNIVERGE SV8100
3 - 108
.
Programming
 90-20-01 Traffic Report Data Setup – Call Traffic Output
Determine whether or not the Call Traffic Output should be measured
(0=no, 1=yes).
 90-21-01 Traffic Report Output – Output Port Type
Define the output port to be used for the traffic reports (0=No Setting,
3=LAN). The reports will print hourly when connected to the output device.
Related Features
Data Communications
Station Message Detail Recording
Traffic Total Report - Sample Report
Terminal OTG Duration Cost ICM Answer Duration Ringing Abandon
301 54 01:45:14 720 326 115 02:11:52 00:09:36 11
301 92 02:37:22 1855 84 84 01:58:31 00:04:19 0
LINE001 -- -- -- 79 71 01:05:26 -- 8
Definitions
Terminal Terminal Number/Called Party Number (maximum 24 digits)
OTG Outgoing Call Frequency/number of outgoing calls (maximum 65535
calls)
Duration Call Duration for an Outgoing Call
Cost Call Charge
ICM Incoming Call Frequency/number of incoming calls (maximum 65535
calls)
Answer Answer Frequency (maximum 65535 calls)
Duration Call Duration for an Incoming Call
Ringing Ringing Duration
Abandon Number of Abandoned Calls (maximum 65535 calls)