UNIVERGE SV8100 Issue 4.0
ACD Installation Manual 4 - 7
SECTION 7 USING SOFTKEYS FOR PROGRAMMING
Each UNIVERGE SV8100 display telephone provides interactive Softkeys for intuitive
feature access. The options for these keys automatically change depending on where
you are in the system programming. Simply press the Softkey located below the
option you wish and the display changes accordingly.
Pressing the volume or scrolls between the menus.
SECTION 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN
When using a display phone in programming mode, you see various Softkey options
displayed. These keys allow you to easily select, scan, or move through the
programs.
Program Mode
Base Service OP1 OP2
Program Mode
CCIS Hard Mtnance
Softkey Display Prompts
If you press this
Softkey . . .
The system will. . .
back Go back one step in the program display.
You can press volume
or to scroll forwards or backwards through a
list of Programs.
Scroll down through the available programs.
Scroll up through the available programs.
select Select the currently displayed program.
Move the cursor to the left.
Move the cursor to the right.
-1 Move back through the available program options.
+1 Move forward through the available program options.
To Next Page
Loading...
