Chapter 1 MAINTENANCE SERVICES
1-33 NWA-033627-001 Rev.4.0
95ch1001.fm
VoIP LOG COLLECTION
(2) Call Log Collection
You can collect the call logs and output them to the RS port of CPU by system data setting.
You can analyze communication conditions of the IP network.
Call Log Collection
(3) RTP monitoring
RTP monitoring is the feature that monitors whether an RTP is received during call, by using the SIP
with connected party. If RTP is not received a certain amount of time (about 10 seconds) from SIP
trunk to CPU blade, a fault notification is sent and the call is restored to normal state. By this feature,
you can avoid occupying channels if a disconnected message is not received because of a network
failure.
4. Confirmation of output call logs
.
Communication Time
.
Number of sending/received packets
.
Number of lost received packets
1. Communication between Station A and Station B
2. Communication is completed
3. Call logs sending3. Call logs sending
Network
Router
Station A Station B
Router
SV8300
Printer
PCPro (PC)
N
E
C
E
xit
H
e
lp
M
I
C
N
E
C
E
xit
H
e
lp
M
I
C
NOVEMBER/21/2008
To Next Page
Loading...
