Chapter 1 MAINTENANCE SERVICES
1-56 NWA-033627-001 Rev.4.0
95ch1001.fm
PING COMMAND
Operating Procedure
By executing the command (CMFA Y=20XX) from PCPro or CAT, you assign the IP address of the ter-
minal you want to send a ping request to. Then you confirm an reply message resulting by executing the
ping command.
Example: Assign “192.168.1.3” to IP address.
The following key operations are effective when the reply message resulting by executing the ping com-
mand is displayed.
• DE (space key): To send again a ping request to the same IP address as the last one.
• - (hyphen key) : To send a ping request to the IP address with 1 subtracted from the last one.
Example: The ping request is sent to “192.168.1.2” if you press DE (space key) after sending it to
“192.168.1.3”.
• S (return key) : To send a ping request to the IP address with 1 added to the last one.
Example: The ping request is sent to “192.168.1.3” if you press S (return key) after sending it to
“192.168.1.2”.
FA2001
ST DE DE
192.168.1.2
JULY/17/2009
To Next Page
Loading...
