Chapter 1 MAINTENANCE SERVICES
1-46 NWA-033627-001 Rev.4.0
95ch1001.fm
QoS DISPLAY ON IP MULTILINE TERMINAL
QoS DISPLAY ON IP MULTILINE TERMINAL
General Description
This feature allows IP Multiline Terminal to display the Number of lost packets, CODEC type, and Pay-
load size of IP Multiline Terminal communication on the
LCD by pressing the function key. This feature
also allows SIP Multiline Terminal to display the Number of lost packets, CODEC type, and Payload size
of SIP Multiline Terminal communication on the LCD by pressing the HELP key continuously.
Display Example:
When QoS Display Key is pressed while an IP Multiline Terminal communicates or HELP Key is pressed
continuously while a SIP Multiline Terminal communicates with the station number 3000, the LCD of IP
Multiline Terminal or SIP Multiline Terminal displays as follows:
You can stop the QoS display with pressing Exit key. Press not the fixed EXIT button on far left, but the
Soft Key of Exit.
You can easily diagnose the communication fault of IP Multiline Terminal or SIP Multiline Terminal by
this feature.
1.Lost Packet:
2.Codec:
Up
Exit Help
2.Codec:
3.Payload
Exit Help
Press Down
Press Up
ExitDown
34
G711u
G711u
40ms
Up ExitDown
Number of Lost Packets
CODEC Type
Payload Size
Help
3000
S&R >>>>PICK
1:26 PM MON 28 MAR 2005
Exit
Station Number
NOVEMBER/21/2008
To Next Page
Loading...
