Chapter 2 TROUBLESHOOTING
2-12 NWA-033627-001 Rev.4.0
95ch2001.fm
FAULT INFORMATION DISPLAY
FAULT INFORMATION DISPLAY
Display on PCPro/CAT
When the MJ/MN alarm has been indicated, you can diagnose the contents of the fault by the Fault Mes-
sage and the Station Line Status Display features which are displayed on the PCPro or the CAT, and restore
the fault.
Fault Message
The fault information is displayed on PCPro/CAT. An example of fault information display is provided
below:
DE EA0>0: XXXXXXXXXXXXXXXX- Fault Information 0
DE EA0>_
ST COMMAND=
S EA0>1: XXXXXXXXXXXXXXXX- Fault Information 1
S EA0>2: XXXXXXXXXXXXXXXX- Fault Information 2
S EA0>3: XXXXXXXXXXXXXXXX- Fault Information 3
S EA0>4: XXXXXXXXXXXXXXXX- Fault Information 4
S EA0>5: XXXXXXXXXXXXXXXX- Fault Information 5
S EA0>6: XXXXXXXXXXXXXXXX- Fault Information 6
S EA0>7: XXXXXXXXXXXXXXXX- Fault Information 7
S EA0>8: XXXXXXXXXXXXXXXX- Fault Information 8
S EA0>9: XXXXXXXXXXXXXXXX- Fault Information 9
For details of (1), (2), see next page.
(1)
CAT mode
EA0 +
0
+
EA0>0: XXXXXXXXXXXXXXXX-
(2)
To Next Page
Loading...
