NEC Univerge SV8300 - Page 55

Chapter 1 MAINTENANCE SERVICES
1-43 NWA-033627-001 Rev.4.0
95ch1001.fm
VoIP LOG COLLECTION
DESCRIPTION DATA
Specify the output destination for the fault
logs/call logs.
NOTE: Set the output port for fault logs/call
logs by CM40 Y=00.
•
(1)
(2)
Y=6
00: Output destination of logs
2 : RS port of CPU
3: Not output
Specify the collection method of fault logs/call
logs.
•
(1)
(2)
Y=6
02: Collection method of logs
0 : Not overwritten
1 : Overwrite
Specify whether fault logs are collected when
the IP Stations login to the system or the
VoIPDB is in online status.
•
(1)
(2)
Y=6
10: Fault log collection
0 : To collect
1 : Not collected
Specify the RS port to collect VoIP log. •
(1)
(2)
Y=00
0: Unit01 Port1
1: Unit01 Port2
08 : VoIP log collection
NONE : No data
Specify the data length for the RS port.
NOTE: When using CPU RS-232C port for
PCPro, set the default.
•
(1)
(2)
Y=01
0: Unit01 Port1
1: Unit01 Port2
0: 7 bit
1: 8 bit
Specify the RS port to make effective the
parity check.
NOTE: When using CPU RS-232C port for
PCPro, set the default.
•
(1)
(2)
Y=02
0: Unit01 Port1
1: Unit01 Port2
0 : Effective
1 : Ineffective
Specify the kind of parity for the RS port.
NOTE: When using CPU RS-232C port for
PCPro, set the default.
•
(1)
(2)
Y=03
0: Unit01 Port1
1: Unit01 Port2
0 : Odd parity
1 : Even parity
A
CMEA
CM40
B
JULY/17/2009