Chapter 2 TROUBLESHOOTING
2-4 NWA-033627-001 Rev.4.0
95ch2001.fm
PRECAUTIONS
Static Electricity Guard
• WHEN MAKING A SWITCH SETTING ON A BLADE
• WHEN CARRYING A BLADE
The mark shown below is attached to the sheet for the work in which blades are handled. When engag-
ing in such work, the installer must be careful not to cause damage by static electricity.
WEAR A WRIST STRAP AND PERFORM
THE WORK ON A GROUNDED
CONDUCTIVE WORK SURFACE.
BLADE
WHEN CARRYING A BLADE AROUND,
KEEP THE BLADE IN A CONDUCTIVE
POLYETHYLENE BAG.
CONDUCTIVE
POLYETHYLENE
BAG
BLADE
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
To Next Page
Loading...
