EasyManua.ls Logo

NEC Univerge SV8300 - Page 93

NEC Univerge SV8300
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 TROUBLESHOOTING
2-25 NWA-033627-001 Rev.4.0
95ch2001.fm
FAULT INFORMATION DISPLAY
Remedial Action on Each Fault Kind
FAULT
KIND
NUMBER
FAULT
CONTENT
FAULT INFORMATION REMEDIAL ACTION
02B CS/ZT fault
occurred
Fault Kind Details: CS/ZT expansion
data read failure
Make the CS/ZT busy or
idle condition by CME5
Y=3.
Turn OFF and ON the
CS/ZT power switch.
Fault Kind Details: CS/ZT expansion
data setting failure
Fault Kind Details: CS/ZT operation
parameter 2 change
failure
02C LAN applica-
tion fault
occurred
When Terminal kind is SMDR:
Fault Content: Connection Timeout
Fault Content: Connection Cut Off text
receive
Check to see if the LAN
cable is correctly con-
nected.
Confirm the condition of
the LAN device con-
nected to the CPU.
(ex.Power of HUB)
When Terminal kind is PMS:
Fault Content: Connection Timeout
Fault Content: Connection Cut Off text
receive
When Terminal kind is OAI:
Fault Content: ABOUT/RLRQ
Fault Content: detect the fault by a
health check
040 Traffic of IP
network
exceeded limit
bandwidth
Reduce the number of equip-
ments connected to the IP
network.
041 Traffic of IP
network
exceeded
warning
bandwidth
Reduce the number of equip-
ments connected to the IP
network.
Continued on next page
1
2
1
2
JULY/17/2009

Table of Contents

Other manuals for NEC Univerge SV8300

Related product manuals