Issue 1.0 UT880
2 - 2 Basics
A Dynamic Address is an intra-net or Internet address that is randomly
assigned by the DHCP server. The DHCP server centrally controls and
assigns IP addresses.
1.2 Using DHCP
To use Dynamic IP Addressing via DHCP, refer to the following procedure:
1. Press the Settings icon on Apps.
2. Choose Ethernet Settings.
3. Select Ethernet configuration.
4. Select DHCP on Connection Type and click Save.
1.3 Using Static IP
The following procedure is to change the IP Address of the UT880 or change
the obtaining IP address method from DHCP to Static IP in accordance to the
network environment.
1. Press the Settings icon on Apps.
2. Choose Ethernet Settings.
3. Select Ethernet configuration.
4. Select Static IP on Connection Type menu.
5. Enter IP Address, Netmask, DNS, Default Router and press Save.
To Next Page
Loading...
