Issue 1.0 UT880
3 - 2 Communication
The PBX is configured to allow use by the UT880.
If the device is not configured automatically then you have two options. One is to
configure the PBX information based on the information provided by your IT support
team, and let the PBX configure the App similar to any other NEC phone.
Once the accounts screen is open, click on the “+” to add an account, or click on an
existing account to open the items shown in Figure 3-2. Each field is described in
detail in Table 3-1 Account Provisioning Parameters in the UT880 Dialer Phone App.
Figure 3-1 UT880 NMLT Dialer App showing “Online” Status for the extension
To Next Page
Loading...
