ANPR LUMO | installation guide
6.2 Menu Items
6.2.1 Home
The Home screen has 4 items, the live view, the Live text results, Detection statistics and the camera information. At
the camera info box, you can check which version of the software is currently installed in the camera.
The Yellow box within the LIVE VIEW represents the region of interest, this region of interest can be changed in the
configuration menu, see chapter 7.2.
When the camera is being setup, it is good to know in which image regions license plates have been detected. The Heat
Map button at the top of the live image turns on a visual display of all detections since the last camera restart. The
current live image from the camera is colorized according to the frequency of license plates which have been detected.
Color codes from dark blue (lowest frequency), orange up to red (highest frequency) are used to visualize the number of
license plate detections
To Next Page
Loading...