Nedap ANPR LUMO - 7.2 ANPR Core Settings

ANPR LUMO | installation guide
23/45
DRAW PLATE: When enabled, ANPR will generate an image of the read plate and overlay
it on the processed images
PLATE VISUALISATION OPTIONS: Select the information that needs to be added the overlay image
- confidence (Reading confidence for the plate)
- State (Detected country resp. state)
- Character info (Confidence of each character)
- Region
LIVE VIEW JPEG COMPRESSION:* JPEG compression reduces the bandwidth during transmission of live
images in the web interface.
7.2 ANPR
These parameters represent the operating software of the camera which takes care of reading and processing requests
from the received images
On the ANPR settings tab parameters for the following features can be altered
- TRIGGER
- MODE OF OPERATION
- ENGINE
- ACCESS
The ANPR Region of Interest (ROI) is the yellow polygon superimposed on the camera image, it defines the image
region were the actual reading takes place.
In addition to the image location, the detection area may also specify a direction and direction range of motion or a
distance change qualifier.