ANPR LUMO | installation guide
7.3.2 FTP UPLOAD
FTP upload can save image files of detected plates to a remote FTP server.
Set to “ON” for the action to be executed.
HOST Enter the Host ftp servers IP address or name, as ftp://
AUTHENTICATION Select the authentication method
USER The username of the ftp server (The user needs read/Write right)
PASSWORD The password of the ftp server
PRIVATE KEY Upload the private key which is to be used for authentication
NAMING PATTERN Are used to include specific reading information (date, time, plate...) in the file name. How to
use and format names using message placeholders. See appendix A.
IMAGE UPLOAD Empty file - sends files with no images. This saves memory and increases the upload speed.
Full image – the whole image taken by the camera
License plate – only the license plate is send
Cropped Image - An image cropped around the LP with a size in % relative to the original size
and scaled to 'Final Image Width/Height' dimensions.
Cropped LP Size - An image cropped around the license plate with a size in % relative to the
original license plate size and scaled to 'Final Image Width/Height' dimensions.
IMAGE QUALITY Refers to the compression rate, it can be set from 1 to 100%, 1 being the maximal
compression level which will produce images with the lowest quality, and 99 being the
minimal compression level with the highest image quality. We recommend to set this to 65-
70%.
7.3.3 FTP DATABASE
FTP database will create and automatically update a text file on the FTP server, containing information about vehicle
number plates recorded by the ANPR.
Set to “ON” for the action to be executed (as shown on the image).
HOST Enter the Host FTP servers IP address or name, as ftp://
AUTHENTICATION Select the authentication method
USER The username of the ftp server (The user needs read/Write right)
PASSWORD The password of the ftp server
PRIVATE KEY Upload the private key which is to be used for authentication
FILENAME Enter the name of the database to be updated (created) with newly recorded information.
ENTRY PATTERN Defines the data to be recorded in the file. How to form entry patterns. See appendix A.
7.3.4 STORE
Store will save an image on the local storage. We would only recommend to use this option to collect images for testing
purposes.
FOLDER the path for example: /root/demo
MIN FREE SPACE The amount of free space left on the device. If there is less space than defined here, files will
not be stored anymore. (no fifo)
FILENAME The name of the file, the filename can be composed using placeholders
IMAGE STORE Images can be cropped and stored as with the ftp action type
To Next Page
Loading...