ANPR LUMO | installation guide
Always The camera will always look for white-on-black plates. This option is slow and should only
be used if absolutely necessary.
Enhanced Detection
This option helps to increase the detection rate of license plates. Nedap uses additional algorithms to find license
plates at the cost of lower reading speed.
Advanced State Detection
For supported countries and classifiers Nedap uses additional matching techniques in order to improve state
recognition. For example it can use the logos in American license plates to directly recognize a state. This feature slows
down the reading frame rate, but significantly improves the quality of state recognition.
7.2.4 ACCESS
WHITESPACE MATCHING
This parameter defines whether whitespaces (' ') should be considered during list matching.
Action JPEG Compression
This option refers only to images which are sent using actions.
JPEG compression significantly reduces the size of the images - this results in faster data transfers (e.g. ftp uploads)
and reduces the bandwidth consumption of the camera.
This parameter controls the level of compression of images for action results. It can be set from 1 to 100, where a
lower number means a higher compression rate with a resulting lower image quality.
Our recommendation is to set the JPEG compression level to 65, as this is a good compromise between image quality
and required network bandwidth. If the camera is connected to a slow network, the JPEG compression should be
reduced to a value of 50 or less.
Check Entry Expiration
This maintenance feature enables a clean-up process in the camera which checks every hour for expired list entries. If
a list entry is out of date it will be removed from the list.
We recommend to leave this feature on at all times.
To Next Page
Loading...