N1500i FACS Manual
66
Part No. 729-110-053 V.1.03 © 2018 Nelson Stud Welding, Inc. All rights reserved.
8.
Troubleshooting
8.1 How to use Troubleshooting guide
This Troubleshooting Guide is provided to help you locate and repair
possible machine malfunctions. Simply follow the procedure listed
below.
1.
LOCATE PROBLEM (SYMPTOM)
•
Look under the column labeled "PROBLEM (SYMPTOMS)".
This column describes possible symptoms that the machine
may exhibit. Find the listing that best describes the symptom
that the machine is exhibiting. If the problem is accompanied by
a flashing warning symbol, see the error code section for more
details.
Step 1. POSSIBLE CAUSE
•
The second column labeled "POSSIBLE CAUSE" lists the
obvious external possibilities that may contribute to the
machine symptom.
Step 2. SOLUTION RECOMMENDED
•
This column provides a course of action for the Possible Cause,
generally it states to contact your local Nelson Authorized Field
Service Facility.
To Next Page
Loading...
